TKM Custom American Flag Decals Four Size Options Door Decal 48x20 (comes as a set) Large 17.5x8 Med 11x5 Small 7x3.5
TKM American Flag T-Shirt Available in Red, Black, Granite in Small thru 3XL - 4XL available in Red only Brand: Comfort Colors - Garment- Dyed T-Shirt 1717
TKM Eff Around and Find Out T-shirt Available in Black Frost and Grey Frost (Sizes Small - 4XL) Brand: District Tee
TKM Madd Scientist Tuner T-shirt Available in Black, Royal, Red and Heather Grey (Sizes Small - 4XL) Also Select Youth Sizes Brand: District Tee
The Lamb camshaft is the little brother of the "Black sheep" Don't let the name fool you!!!! This little camshaft will help you meet your goal with the right combo Designed for the 4.8/5.3/6.0 Lift is .615 with a 1.7 rocker degree to a 112 intake centerline We also offer spring packages in stock Give us a call or email if there are any question about if this camshaft is right for your combo
Blue/Graphite Mesh Flex Fit TKM Performance Hat Brand: Flexfit New swag at TKM- Sale!
Banner w/ TKM Logo- Thick Black Vinyl for durability
- Large 3' X 5'
- Stainless Steel eyelets for hanging
- Out of stock
TKM Black/American Flag Fleece Hooded Sweatshirt Brand: Sprint Fleece Hooded Sweatshirt 11112 
TKM Stone Grey/American Flag T-Shirt Brand: Next Level Unisex Short Sleeve Crew 3227- Sale!Out of stock
TKM Hub Shirt Style: Original Brand: Next level Available in Small, Med, Large, Extra Large, 2XL, 3XL - Out of stock
New TKM Hoodies just in time for the cold weather! Available in Red and Black S-4xl 
The “BlackSheep” camshaft is back in stock!!! The baddest hydraulic roller ls camshaft is here and They don’t last long so get them before they are gone.We know some of you don’t want to go this extreme so we have created the baby black sheep aka “Lamb Cam” just for stock bottom end 5.3 and 6.0 boosted applications which is perfect for your boosted ls swap projects! If you want your LS to sound like a tractor or you Grandpa's Dump Truck then this is not the camshaft for you!1000hp to over 2000hp this camshaft will have you covered...Lift is .650 with a 1.7 rockerdegree to a 112 intake centerline- Sale!
TKM Jacket with Logo embroidered on the left chest. *** IN STOCK NOW *** Brand : DRI DUCK 90/10 Poly/Spandex Motion Jacket - Sale!
Gen4 LS Timing Cover
Includes:Gen 4 Timing Cover Powder Coated Black with TKM Laser Etched, CNC to clear double roller timing chain set up, timing cover only!
Not for use on LS7 or LS3 Dry Sump Long Snout Cranks - Out of stock
TKM Moisture Wicking Shirts 
Includes:- Billet Made in House
- Designed to block off when running a external crank wheel
- Accepts all factory Hardware and includes oring
Please note: TKM Parts are made in house not out sourced!!! We appreciate your patience!
The Popular Mad Scientist Design now available in Blue/Charcoal Hoodies from Small to 4XL
TKM Custom Coyote Lift PlatePowder Coated BlackTKM Laser EtchedWill not clear di injector rail boltsMade in House at TKM and Hand Welded by "The" Kevin Mullins
TKM Performance LS Motor Plates In Stock and ready to Ship!
The TKM Bigstick is rowdy! The perfect n/a camshaft for the ls series Lift is .625 with a 1.7 rocker Degree to a 109 intake centerline We also offer spring packages in stock Give us a call or email if there are any question about if this camshaft is right for your combo
TKM Mystery Tee Style: Varies Brand: Varies Available in Small, Med, 3XL- Sale!
Custom TKM Ati Mandrel Hard Anodized BlackDesigned to work with ATI balancers F-body/Y-body and Coyote and othersDoes not come with Pulley, will work with 1 inch bore pulleys and 1/8th inch key 
Includes:- Full set (16) of billet replacement cam caps
- Integrated dowel pins with tighter tolerances
- Front cap not included (but can be added for $350.00)
- Line bore is required
- Cnc line bore installation of cam caps for additional $850.00 plus any other work performed
Please note: Need to make sure the dowel holes in the heads are the same size, or if they are small and large!!!! Front Cam Caps are designed to be used with the RGR Secondary Timing Kit
Just in time to beat the heat!!! Custom TKM Straw Hats
Includes:- Billet Made in House
- Designed to use with Holley 554-127
- Accepts all factory Hardware and will work in a Gen 4 Timing Cover with Cam Sensor Hole
Please note: TKM Parts are made in house not out sourced!!! We appreciate your patience!
Machined in house at TKM Performance Tested and Proven to Provide long lasting Performance under Extreme Conditions including Ethanol and Methanol Fuels Custom blend of Wear Resistant Acetal Polymer CNC Machined Fits GEN 1/2/3 & GT350/Predator Secondary Tensioners
Machined in house at TKM Performance Tested and Proven to Provide long lasting Performance under Extreme Conditions including Ethanol and Methanol Fuels Same Guides that are used on RTR Drift Team, Cleetus's Neighbor, and McFlurry (We all know how tough these guys are on stuff) and many others Custom blend of Wear Resistant Acetal Polymer CNC Machined No Wear Liners Needed Were only available for in house builds, now we are offering them to everyone! Fits GEN 1/2/3 & GT350/Predator Please Note: These are a wear item and need to be checked for wear... Failure to do so can cause alot of damage- Sale!
BoostLine Connecting Rods 5.933 Length
Coyote, 4.6 2v/3v/4v
Connecting Rod Material:Chromoly 4340 steelAdvertised Horsepower Rating:2,000 hpAdvertised RPM Rating:10,000 rpmThe patented, 3-pocket body forged from premium 4340 steel incorporates the best features of both the H-beam (mass/weight) and I-beam (strength) designs. 
ARP main stud kits help eliminate main cap walk/fretting and protect the threads in your engine block. They include studs made from 8740 chromoly steel and heat-treated in-house to 190,000 psi tensile-strength rating. The precision J-form threads are rolled after heat-treat for much stronger threads than the competition. Kits come complete with hardened parallel-ground washers and high-quality nuts. Add confidence in the strength of your engine build with the ARP main stud kit designed for your application
Custom Carb Intake Style Spacer with Burst Panel available in 4150 and 4500 2.4" Tall Comes with Burst Plate
Cometic MLS Head Gaskets GEN2 Coyote MLS, Multi-Layer Stainless Steel 3.701 in. Bore 0.040in. Thickness Left and Right Head Gaskets
Billet Aluminum Main Caps for Coyote Will work on Gen 1/2/3 and GT350/Predator Blocks Uses standard Coyote Main Bearings and Hardware Will require Line Bore for fitment Made from 6061 Material We have made 2500+whp with this Main Caps on a Production Tkm Prepped Block and Stock Crank Machined in house at TKM Performance
Custom 1' spacer for Modular/Coyote engines and a lockup transmission Starter Holes are Tapped so no need to get longer starter bolts Dowels included 16mm x 50mm x2 Will need 1' longer bell housing bolts Made in House at TKM Performance
Custom 12mm Coyote Head Studs Head Stud Kit for Ford Coyote 5.0L, 12mm threads, 12pt
nuts, 6304 material 220,000 psi, black oxide finish Made in the USA Manufactured for TKM by Point One Not for use in Gen1 GT350 Blocks We also have a H11 Material 250,000 psi tumble finish option- Sale!
In stock and Ready to Ship ARP Head Stud kit for Early Gt350 Voodo Engines 2015-2018 Modeal ARP2000 Material Short 12mm Head Studs Will not Fit Gen1/Gen2/Gen3 Coyotes, will only work with 2015-2018 GT350 Voodo Blocks - Sale!
In Stock and Ready to Ship! Arp Custom Age 625+ 12mm Head Stud Kit for Coyote Ideal for High Horsepower Builds Will fit Gen1/Gen3 and Predator Engines Will not fit Gen2 or Early Model GT350 Block with Short 12mm Studs 
Custom made for TKM Performance by Advanced Sleeves in Ohio Coyote Dry Sleeves for Gen1/2/3/4 and GT350/GT500 5.2 Platform Machining is Required for Install, Bore and Final Hone is also required Includes 4 single flats and 4 dual flats Will work with 3.630-3.710 Bore Size with Final Machining 3.825 od 5.250 Length .200 Flange Thickness- Sale!
Cometic MLS Gaskets for GEN3 Coyote Cylinder Head Gaskets .040" Thickness 94.5MM Bore MLS HEAD GASKET , FORD 5.0 COYOTE 2018 Pair of Head Gaskets - Sale!
Cometic MLS Gaskets for GEN3 Coyote Cylinder Head Gaskets .051" Thickness 94.5MM Bore MLS HEAD GASKET , FORD 5.0 COYOTE 2018 Pair of Head Gaskets 
Ford 5.0L Gen-4 Coyote .045" Thickness 94.5mm Bore Pair of Cometic Head Gaskets- Sale!
Cometic Head Gasket MLS Style 3.701 in. Bore .040 in. Compressed Thickness 4.6 Modular Head Gaskets C5503-040 and C5502-040 
Custom Wiseco Pistons for 13/14 GT500 5.8L Designed and proven to handle upwards of 2000hp 3.681 Bore (Std Bore) will work with sleeved 5.4/5.8 Blocks or Factory Bore 13/14 Model GT500 1.220 CH -11 cc Negative Volume .866 Wrist pin .200 Thick Wall Skirt Coated .300 Top Ring Land 9350XX Ring Set will not work with Iron 5.4L Blocks Set of 8 Pistons with Pins and Rings
Custom Wiseco Pistons for Coyote 3.662 Bore will work with Gen1/2/3/4 and Voodo/Predator Cylinder Heads Packed full of performance and durability features and provided with rings, and tool steel .250 thick pins. These pistons feature a .320 thick Top ring land with a coated crown and skirts. These Pistons will also work as a replacement piston in a Gen3 Block without sleeves and will work with all the available cylinder head configurations. These pistons are -1.88cc Volume Piston Specs 3.662 Bore (Factory Gen3/4 Size) 1.165 Compression Height -1.88cc Piston Volume .866 Diameter .250 thick Tool Steel Wrist Pins Sold as a Set of 8 with Pins, and Rings
Holley EFI
HOLLEY EFI DOMINATOR ECU
The new standard in EFI with virtually unlimited capabilities Integrated electronic transmission control, drive by wire throttle control, dual wideband oxygen sensor capability, extensive amount of inputs and outputs for various combinations, and much more
Dominator® EFI Vehicle Management Systems are intended for non-emissions street and racing engine applications. In addition to the transmission control, drive by wire, and dual wideband oxygen sensor options, Dominator® systems have nearly unlimited capabilities to control any power adder, input, or output you can throw at them. Need to run a turbocharged, nitrous injected 8 cylinder running water-methanol injection? No problem with Dominator® EFI. How about control a 4L60E transmission as well as the fuel and spark on your street rod? No problem. There are also enough inputs and outputs to allow the Dominator® VMSs to serve as their own data acquisition and control module. The Dominator® VMS will eliminate the need for additional controllers as they are all contained in this one unit. The only thing limiting the Dominator® Vehicle Management System is your imagination!
Looking for a plug and play alternative for your stock or built late model factory EFI engine? How about a replacement ECU for your older Holley C950? Holley has you covered. HP EFI ECU and harness kits are designed to be used with popular factory EFI engines as an alternative to the factory ECU and harness or as a replacement for your C950 ECU. The HP allows you to accurately control the fuel and ignition of your engine along with additional controls for nitrous, boost or water meth.
- “Quick Start” ignition and fueling strategy for LS x Engines
- Data Logger, scalable axes, smoothing, multiple graph view ability, rpe-defined notes fields and more
- Strip Chart Real-Time Data Viewer
- Integrated Boost Control - Boost vs Time, Boost vs Gear (Time or RPM), Boost vs RPM, Boost vs Speed, Launch control, Boost launch builder, Over-boost safeties, Boost scramble
- Traction Control - Power reduction via timing, nitrous percentage or boost (Requires Davis Technologies Holley Module)
- “Quick Start” fueling for all engines
- Option for VE based fueling strategy
- Fuel Map and Learn Function Smoothing
- Configurable User Password Protection
- Fully Configurable lap top Gauge Panel
- Eight sequentially driven 8:2 peak and hold injector drivers, capable of driving up to 16 low or high impedance injectors as a standard feature. Multiple staged injector strategies
- Eight channel Distributorless Ignition (DIS) outputs capable of directly driving “Smart” ignition coils or Holley DIS coils. Will drive 2 wire coils with the addition of PN 554-112 high current coil driver module
- Plug and Play control of factory GM 24x and 58x LSx engines
- Integrated single channel wide band oxygen sensor control. Works with NTK or Bosch sensors
- Internal data-logging standard with a huge 2GB of memory
- 4 Stage progressive nitrous control
- Turbo boost control
- Self-tuning fuel table strategy greatly simplifies tuning process
- Individual cylinder fuel and spark control allows you to unlock your engine’s potential
- Works with 4, 6, 8 cylinder engines
- Unique lb/hr based fueling strategy greatly simplifies and commonizes tuning
- Advanced idle, closed loop, and enrichment strategies allow for very stable operation
- ECU is fully potted and can be mounted in the engine compartment or interior
- Sealed automotive and marine grade connectors
- Allows for use of common OEM sensors as well as customer sensor calibration input
- Ignition Plug and Play with GM 24x and 58x LSx engines, GM HEI, Ford TFI magnetic and hall effect trigger, and other ignition systems. New Plug and Play applications in process
- Custom settings can be configured to allow many other applications
- 1-5 Bar MAP sensor capability
- Two channel knock control sensor Inputs for both one or two wire knock sensors
- Dedicated fuel and oil pressure inputs
- Controls both stepper and PWM Idle Air Control (IAC) motors
- Speed density, Alpha-N, or combination fueling strategies
- 4 Programmable high or low Pulse Width Modulated (PWM) outputs and 4 fully configurable inputs can be configured for use
- 4 Stage nitrous oxide control
- Fully featured nitrous control eliminates the need for a separate nitrous controller device
- Can be configured “Wet” or “Dry” with closed loop feedback
- Progressive control based on time, RPM, or boost; requires part # 554-111
- Lean or rich safety cutoff
- Full timing retard/control configurability per stage based on RPM or time
- Integrated Water/Methanol injection control
- Uses Holley Water/Meth solenoids specially designed and calibrated for use with this EFI system to allow the user to enter Water/Meth flow as a percentage of fuel injector flow for Water/Meth tubing
- Sale!
Ultra I-Beam
- Ultra connecting rods are made entirely in the U.S.A. Every Ultra connecting rod is produced from specially formulated TimkenSteel 4330V steel. This material is then precision forged in Michigan and fully machined in our Fostoria, Ohio facility. Many geometric nuances have been incorporated into the design of Ultra connecting rods. These design features enhance the Ultra against specific loads and stresses which are applied to connecting rods subjected to high load, high RPM applications. Ultra connecting rods are fastened by high alloy cap screws made specifically for severe duty service by ARP Inc. Produced with rolled threads, these unique bolts offer improved thread engagement for a smoother more consistent net clamping load. To eliminate deformation and extrusion only AMS 642 bronze alloy is used within the wrist pin housing bore.
LS Series I-Beam Description Rod Journal Typical Wt. Part # 6.125 2.100 662g U17171
- Sale!
Xtreme LS Description Rod Journal Pin Typical Wt. Part # 6.125 2.100 .927 in. CSC6125DS2A2AX Compstar Xtreme Connecting Rods
The next step in the Compstar line up. All the quality, reliability and workmanship you have relied upon for years from the Compstar line up is taken to the Xtreme. Specifically designed for power adder and diesel applications. The Compstar Xtreme utilizes the same proven 4340 material and ARP 2000 or L19 fasteners. Strength is added by thickening up the flanges of the H beam and a reduced depth of cut towards the center of the rod. Then non-essential weight is taken out of the beam to help keep the overall weight of this rod in check.
Custom TKM Performance Coyote Rotating Assembly If you are looking to make some power look no futher!!!! This set has been proven to handle 1800+hp and will also work great in a street application. This combo comes with our Custom 3.662 Bore Pistons, Boostline Rods, and Boss Crankshaft and is available Balanced or without Balance. Please allow a 2-3 day turnaround if you choose the Balanced Assembly. These parts are on the shelf and ready to go Custom Wiseco Pistons for Coyote 3.662 Bore will work with Gen1/2/3/4 and Voodo/Predator Cylinder Heads Packed full of performance and durability features and provided with rings, and tool steel .250 thick pins. These pistons feature a .320 thick Top ring land with a coated crown and skirts. These Pistons will also work as a replacement piston in a Gen3 Block without sleeves and will work with all the available cylinder head configurations. These pistons keep the factory Gen3 Compression of 12:1 Piston Specs 3.662 Bore (Factory Gen3/4 Size) 1.165 Compression Height 7cc Postive Dome .866 Diameter .250 thick Tool Steel Wrist Pins Sold as a Set of 8 Boostline Connecting RodsFord, Modular 4.6L, 5.933 in. Length, Connecting Rod Set
- Purpose-Built For Boost High Boost and Ford Modular 4.6L & Coyote Applications
- Forged From Ultra-Strong 4340 Steel
- Patented Three-Pocket Design
- Capable of 2000 HP
- Stroker Clearance
- 3/8 x 1.600 in. ARP 2000 Fasteners
- High Quality APMCO Bronze Pin Bushing
- 26 Point Detailed CMM Inspection Report Included
