Machined in house at TKM Performance Tested and Proven to Provide long lasting Performance under Extreme Conditions including Ethanol and Methanol Fuels Same Guides that are used on RTR Drift Team, Cleetus's Neighbor, and McFlurry (We all know how tough these guys are on stuff) and many others Custom blend of Wear Resistant Acetal Polymer CNC Machined No Wear Liners Needed Were only available for in house builds, now we are offering them to everyone! Fits GEN 1/2/3 & GT350/Predator Please Note: These are a wear item and need to be checked for wear... Failure to do so can cause alot of damage- Sale!
The PAC-1219 Spring Kit is a drop-in high performance spring kit for all OE LS cylinder heads and is rated for up to .625" lift. This spring kit uses all OE hardware, including seats, retainers, and locks and is 100% drop-in. The PAC-1219s are an ovate beehive spring that has increased loads, rates and frequencies for more aggressive cams. This is a full set of 16 springs. Type:Beehive Valve SpringsSpring Diameter Bottom (in.):1.307Spring Diameter Top (in.):1.072Spring I.D. Bottom (in.):0.885Spring I.D. Top (in.):0.650Max Lift (in.):0.625Load (lbs) @ Installed Height (in):135 @ 1.800Open Load (lbs) @ Open Height (in.):348 @ 1.175Coil Bind (in.):1.100Rate (lbs/in.sq):340Quantity:Sold as a set of 16 
ARP main stud kits help eliminate main cap walk/fretting and protect the threads in your engine block. They include studs made from 8740 chromoly steel and heat-treated in-house to 190,000 psi tensile-strength rating. The precision J-form threads are rolled after heat-treat for much stronger threads than the competition. Kits come complete with hardened parallel-ground washers and high-quality nuts. Add confidence in the strength of your engine build with the ARP main stud kit designed for your application
Includes:- Full set (16) of billet replacement cam caps
- Integrated dowel pins with tighter tolerances
- Front cap not included (but can be added for $350.00)
- Line bore is required
- Cnc line bore installation of cam caps for additional $850.00 plus any other work performed
Please note: Need to make sure the dowel holes in the heads are the same size, or if they are small and large!!!! Front Cam Caps are designed to be used with the RGR Secondary Timing Kit
This is what you are looking for if you want to add some chop and power to your GENIII/GENIV LS LS 3-Bolt Designed for Cathedral Port Heads Cam Specs 21x/21x@.050 108 lobe separation and .553 lift with 1.7 rocker We also offer Pac-1219 Drop in Springs for the Truck Camshafts for $220.00
Need some more power and sound out of your GENIII/GENIV LS powered Truck??? Then we have what you are looking for!!!! Designed to work with Cathedral Port Cylinder heads Cam Spec 21x/22x@@.050 .553 lift with 1.7 Rocker and 110 LSA We also Carry Drop in Pac-1219 Springs in Stock for $220.00
FORD COYOTE SWAP OIL PAN KIT
1979-2004 Mustang 5.0L Coyote engine swap. Fits Gen 1 and Gen 2 Coyote engines 2011-2017 model yearsHolley's new Gen1/Gen2 Coyote oil pan makes your Fox body Mustang swap easier. The oil pan design maintains the oil capacity of stock Mustang Coyote oil pan (8 qt. nominal) to ensure adequate oil supply in all street performance and factory-stock type racing applications. The new design installs using stock Coyote engine gasket/baffle assembly to provide factory-like sealing and baffling/windage characteristics. A proprietary design pick-up tube/O-ring and lower sump baffle plate are included. The 302-50 comes equipped with -10 O-ring boss (ORB) port bung at front of pan for easy connection of turbo drain plumbing (fitting and/or plug is user-supplied as needed). The new low-profile front pan geometry permits Coyote engine installation on stock 1984-2004 Mustang K-members (1984-1995 K-members require the use of specific proprietary design Hooker Blackheart engine mounting brackets) and specific aftermarket K-members from AJE, Team Z, Maximum Motorsports, and UPR for 1979-2004 Mustangs. Application fitment is compatible with Hooker Blackheart and other brand Coyote swap headers for 1979-2004 Mustangs. The steel construction is hand-welded for strength, longevity and good looks. The zinc plated finish provides corrosion resistance on the inside and outside of the pan.
- Low-profile front pan geometry permits Coyote engine installation on stock 1984-2004 Mustang K-members (1984-1995 K-members require the use of specific proprietary design Hooker Blackheart engine mounting brackets).
- Also fits specific aftermarket K-members from AJE, Team Z, Maximum Motorsports, and UPR.
- Maintains oil capacity of stock Mustang Coyote oil pan (8 qt. nominal) to ensure adequate oil supply in all street performance and factory-stock type racing applications.
- Installs using stock Coyote engine gasket/baffle assembly to provide factory-like sealing and baffling/windage characteristics.
- The design includes a bung on the left side of the sump for the stock Mustang Coyote oil level sensor.
- Proprietary design pick-up tube/O-ring and lower sump baffle plate are included.
- Equipped with -10 O-ring boss (ORB) port bung at front of pan for easy connection of turbo drain plumbing (fitting and/or plug is user-supplied as needed).
- 100% quality hand-welded construction for strength, longevity and good looks.
- Zinc plated finish provides corrosion resistance on the inside and outside of the pan.
- Fitment compatible with Hooker Blackheart and other brand Coyote swap headers for 1979-2004 Mustangs.
- Oil pan fits 2011-2017 Coyote engines
Custom 12mm Coyote Head Studs Head Stud Kit for Ford Coyote 5.0L, 12mm threads, 12pt
nuts, 6304 material 220,000 psi, black oxide finish Made in the USA Manufactured for TKM by Point One Not for use in Gen1 GT350 Blocks We also have a H11 Material 250,000 psi tumble finish option
Custom 1' spacer for Modular/Coyote engines and a lockup transmission Starter Holes are Tapped so no need to get longer starter bolts Dowels included 16mm x 50mm x2 Will need 1' longer bell housing bolts Made in House at TKM Performance
Oil Pan, Steel, Clear Zinc, Dart LS Next Gen 3 Skirted Block, Early/Swap F-Body Race Baffled, Spin-On Oil Filter Adapter that Accepts 22mm thread Dart LS Next Gen 3 skirted engine blocks. Oil pan includes a spin-on oil filter adapter MOR-22463 and is designed to be used with a 1998-2002 F body dipstick and tube GM numbers 12628771 and 12551581 Moroso 24152 Pickup Tube for 20152 Oil Pan not included Steel, Wet Sump, 7 Quart Capacity, 6" Deep Early F-Body/Swap Engine Application: Dart LS Next Gen 3 Skirted Block Fits: ’67-’92, ’10-’15 Camaro, ’68-’78 Nova, ’65-’72 Chevelle, ’53-’96 Corvette, ’78-’88 G-Body, and GM S10/S15 Two Wheel Blazer/Truck, Can also be used in additional applications; check dimensions- Clears a 4.25" stroke and has a 7 Quart Capacity
- Three trap door assembly and removable windage tray for improved oil control
- Fabricated steel with clear zinc finish
- Includes billet aluminum 22mm spin-on filter mount with 1/4" NPT sensor port
- Compatible with LS car application dipstick
The Lamb camshaft is the little brother of the "Black sheep" Don't let the name fool you!!!! This little camshaft will help you meet your goal with the right combo Designed for the 4.8/5.3/6.0 Lift is .615 with a 1.7 rocker degree to a 112 intake centerline We also offer spring packages in stock Give us a call or email if there are any question about if this camshaft is right for your combo
The TKM Bigstick is rowdy! The perfect n/a camshaft for the ls series Lift is .625 with a 1.7 rocker Degree to a 109 intake centerline We also offer spring packages in stock Give us a call or email if there are any question about if this camshaft is right for your combo
